Cheers for purchasing a Nectar Collector,
the side by side step in the evolution of vertical dab gear!

We hope you find this vertical vaporizer as useful and convenient equally we exercise.
To aid get you started here are a few tips and tricks that we experience will contribute to your feel; making it the all-time it can possibly be:

PUTTING IT TOGETHER

NECTAR COLLECTORS

NECTAR COLLECTORS

Nectar Collectors

Footstep ane: Insert the glass Nectar Collector Mouthpiece into the non-threaded end of the medium sized stainless steel 16mm Connector.

Stride 2: Insert the glass and stainless steel spillguard into the inside of one of the large stainless steel connectors.

Footstep 3: Using the other large stainless steel connector, insert the drinking glass diffuser into the inside.

Footstep four: Insert the Stinger Tip Core into the NON-THREADED end of the Stinger Tip Connector

Step v: Screw the Stinger Tip into the threaded finish of the stainless steel connector that holds the diffuser

Step 6: Connect the stainless steel connector with the spillguard fastened into the narrow end of the glass Mini Pro Cadre.

Footstep seven: Fill the drinking glass Mini Pro Core, through the open end, with water to the top of the spillguard on the smaller terminate.

Stride 8: Requite information technology a petty shake, to remove excess water.

Step 9: Keeping the cadre upside down(spillguard pointing to the sky), place the connector, with the diffuser attached, to the wide opening on the Mini Pro core.

Step 10: Spiral the double sided Nectar Connector into the connector with the connector with the spillguard.

Pace 11: Spiral the mouthpiece on to the Nectar Connector fastened to the connector with the spillguard.

HONEYBIRD KITS

HONEYBIRD KITS

Honeybirds

Step 1: Insert the glass diffuser into the inside of the big stainless steel connector

Pace 2: Insert the Stinger Tip Core into the NON-THREADED end of the Stinger Tip Connector

Step three: Screw the Stinger Tip into the threaded end of the stainless steel connector.

Pace 3: Fill up the drinking glass Honeybird Pro Core, through the big opening, with water to the pinnacle of the spillguard on the smaller end.

Step 4: Give it a picayune shake, to remove backlog water.

Step five: Keeping the cadre upside down, place the connector, with the diffuser attached, to the wide opening on the Honeybird Pro core.

Step vi: Turn it correct side up, with the tip down, and you are ready to go.

PUTTING IT TOGETHER

NECTAR COLLECTORS

NECTAR COLLECTORS

Nectar Collectors

Step ane: Insert the glass Nectar Collector Mouthpiece into the not-threaded end of the medium sized stainless steel 16mm Connector.

Step ii: Insert the drinking glass and stainless steel spillguard into the inside of i of the large stainless steel connectors.

Step 3: Using the other large stainless steel connector, insert the glass diffuser into the within.

Step 4: Insert the Stinger Tip Core into the NON-THREADED end of the Stinger Tip Connector

Pace 5: Spiral the Stinger Tip into the threaded end of the stainless steel connector that holds the diffuser

Step 6: Connect the stainless steel connector with the spillguard attached into the narrow end of the glass Mini Pro Core.

Step seven: Make full the glass Mini Pro Core, through the open end, with water to the summit of the spillguard on the smaller end.

Footstep 8: Give it a piffling shake, to remove excess h2o.

Step nine: Keeping the cadre upside downward(spillguard pointing to the sky), place the connector, with the diffuser attached, to the wide opening on the Mini Pro core.

Pace 10: Screw the double sided Nectar Connector into the connector with the connector with the spillguard.

Footstep eleven: Screw the mouthpiece on to the Nectar Connector fastened to the connector with the spillguard.

HONEYBIRD KITS

HONEYBIRD KITS

Honeybirds

Pace 1: Insert the glass diffuser into the inside of the large stainless steel connector

Step 2: Insert the Stinger Tip Cadre into the NON-THREADED stop of the Stinger Tip Connector

Step three: Screw the Stinger Tip into the threaded end of the stainless steel connector.

Step three: Fill the glass Honeybird Pro Core, through the big opening, with water to the top of the spillguard on the smaller cease.

Step 4: Give it a trivial milk shake, to remove backlog water.

Step 5: Keeping the cadre upside down, place the connector, with the diffuser attached, to the wide opening on the Honeybird Pro core.

Step half-dozen: Turn it right side up, with the tip downwardly, and you lot are ready to go.

TIPS & TRICKS

HOW DO I WORK THIS THING

What to do.

HOW DO I WORK THIS Thing

Using the Nectar Collector is very unproblematic. As we like to say, "Just heat the tip, dip, and sip" merely beware, overheat the tip or botch the dip and you lot might find yourself in a viscous situation.

GETTING THE WATER IN ... AND OUT

Go information technology wet

GETTING THE WATER IN ... AND OUT

All the water cooled Nectar Collectors are filled from the acme. Make full with h2o about ½ way up the inside diffuser for optimal percolation.

Fill up your water cooled Nectar Collector with the tip removed and brand certain there is no water in the lower joint earlier using. Water trapped in the tip tin can pb to cracking of the tip or joint or WORSE. H2o will cause a hot drinking glass tip to crack instantly. It is also possible for h2o dripping into a hot tip to vaporize violently plenty to shatter the lower body of your Nectar Collector. No Bueno …

To remove the h2o, remove the tip and blow down as hard as you tin through the mouthpiece. The h2o will be pushed out through the lesser of the piece.

TIPS FOR YOUR TIP

Heating the tip

TIPS FOR YOUR TIP

Heating the Tip

Again, exist sure at that place is no water trapped in the tip or in the bottom joint of the Nectar Collector. If h2o drips into a hot tip it can vaporize and shatter the lower torso of your slice. To properly estrus the tip, utilize a brushing motion with your torch flame and heat the very finish of the tip simply. Later on a few seconds agree the torch steady so that the border of where the blueish part of the flame meets the yellow role of the flame is focused on just the end of the tip. Gently roll the Nectar Collector back and forth to get an even heat on the end of the tip. Once the cease of the tip has a faint orangish glow terminate heating and wait … about 3 seconds. If the tip is glowing ruddy you will be burning, not vaporizing your concentrate. WARNING: DO NOT OVERHEAT THE TIP. Overheating can lead to great of the joint that connects the tip to the Nectar Collector. Most concentrates vaporize between 600 and 900 degrees F. If your tip is glowing scarlet hot, it is TOO HOT.

TAKING THE PERFECT HIT

What is the Dip, Sip, & Rip

TAKING THE PERFECT HIT

What is the Dip and Sip?

For best results approach the edge of your concentrate advisedly with the hot tip. Going for the heart of the pile will crusade it to cook and pool, which could result in your sucking some of your valued resource up into the Nectar Collector without it vaporizing. In add-on it will go out your remaining stash tasting less than optimal.

For the Perfect Hit

Begin drawing in air through the mouthpiece earlier touching the hot tip to the nectar. Lightly affect the edge of your stash and immediately pull abroad while continuing to inhale. If you want a bigger hit go dorsum right away for another dip and some other and another… WARNING: For those of you lot with more oil than brains … DO Non SUBMERGE YOUR HOT TIP INTO YOUR STASH JAR AND Effort TO Accept THE MOTHER OF ALL RIPS. The concentrate could vaporize violently enough to cause damage to your piece … or you!

CLEANING

To make clean your piece, showtime remove your tip and blow all of the water downwards through the tip joint from the mouthpiece. Subsequently this is done, fill the piece with Formula 710, or your preferred cleaner, and allow the piece to soak for at least one 60 minutes. We like formula 710. Salt and rubbing alcohol also works well. Be careful if using Simple Green, we have had it take off decals on a few occasions.

PRO TIP: Prepare the slice vertically in a cup or glass and allow information technology to soak overnight. Rinse your piece with hot water until the water runs clear. The tip can be completely submerged in the cleaning solution and rinsed the same manner.

WARRANTY

Backing our production

WARRANTY

The Nectar Collector is handmade by human beings. Nosotros strive to get it right every time merely occasionally defects in materials and workmanship slip through our quality control system and finish upwards in the hands of our customers. If you are not 100% satisfied with your Nectar Collector when yous receive it, please contact us and we will see what we tin can practice to make it right. Our mission is the continuous improvement of our product line as well as the technique of vertical vaporizing. We are interested in any feedback from yous our well-nigh valued client.

RETURNS & REPAIRS

Shit Happens

RETURNS & REPAIRS

Shit happens… Here at Nectar Collector we take seen information technology all and stock-still about of it. Anything brusque of your favorite piece in the globe laying in 100 pieces on your tile floor is probably repairable. Our rates are reasonable and our turnaround time is fast. Allow us know what is broken and we will permit you know what we can do.

If yous need to return your Nectar Collector for any reason delight visit our Returns and Repairs portal.

TIPS & TRICKS

HOW DO I Work THIS THING

What to exercise.

HOW Exercise I WORK THIS Thing

Using the Nectar Collector is very simple. Equally we like to say, "Just heat the tip, dip, and sip" but beware, overheat the tip or botch the dip and you lot might find yourself in a sticky situation.

GETTING THE Water IN ... AND OUT

Become information technology wet

GETTING THE WATER IN ... AND OUT

All the water cooled Nectar Collectors are filled from the superlative. Fill with water about ½ way up the within diffuser for optimal percolation.

Fill your water cooled Nectar Collector with the tip removed and make sure in that location is no water in the lower joint before using. Water trapped in the tip can pb to bang-up of the tip or joint or WORSE. H2o will cause a hot glass tip to fissure instantly. It is also possible for water dripping into a hot tip to vaporize violently enough to shatter the lower body of your Nectar Collector. No Bueno …

To remove the water, remove the tip and blow downward equally difficult equally y'all can through the mouthpiece. The water will exist pushed out through the lesser of the piece.

TIPS FOR YOUR TIP

Heating the tip

TIPS FOR YOUR TIP

Heating the Tip

Once over again, be sure there is no water trapped in the tip or in the bottom joint of the Nectar Collector. If water drips into a hot tip it tin vaporize and shatter the lower body of your slice. To properly rut the tip, utilise a brushing motion with your torch flame and heat the very end of the tip only. Later on a few seconds hold the torch steady so that the edge of where the bluish office of the flame meets the yellow part of the flame is focused on simply the end of the tip. Gently roll the Nectar Collector back and forth to get an even oestrus on the cease of the tip. Once the end of the tip has a faint orangish glow stop heating and expect … about 3 seconds. If the tip is glowing crimson you volition be burning, not vaporizing your concentrate. Alert: Exercise Not OVERHEAT THE TIP. Overheating can lead to cracking of the joint that connects the tip to the Nectar Collector. Most concentrates vaporize between 600 and 900 degrees F. If your tip is glowing red hot, information technology is TOO HOT.

TAKING THE PERFECT Hitting

What is the Dip, Sip, & Rip

TAKING THE PERFECT HIT

What is the Dip and Sip?

For best results approach the border of your concentrate carefully with the hot tip. Going for the eye of the pile will cause it to melt and puddle, which could issue in your sucking some of your valued resource up into the Nectar Collector without it vaporizing. In addition it will exit your remaining stash tasting less than optimal.

For the Perfect Hitting

Begin drawing in air through the mouthpiece earlier touching the hot tip to the nectar. Lightly touch the edge of your stash and immediately pull away while continuing to inhale. If y'all want a bigger hit become back correct away for another dip and another and another… Warning: For those of you with more oil than brains … Practise NOT SUBMERGE YOUR HOT TIP INTO YOUR STASH JAR AND Endeavor TO Take THE Female parent OF ALL RIPS. The concentrate could vaporize violently enough to cause damage to your piece … or you!

CLEANING

To clean your piece, first remove your tip and blow all of the water downward through the tip joint from the mouthpiece. Subsequently this is done, make full the piece with Formula 710, or your preferred cleaner, and allow the piece to soak for at least one hr. We like formula 710. Salt and rubbing alcohol also works well. Be conscientious if using Simple Green, we have had information technology have off decals on a few occasions.

PRO TIP: Set the piece vertically in a cup or glass and allow it to soak overnight. Rinse your piece with hot water until the h2o runs clear. The tip can be completely submerged in the cleaning solution and rinsed the same way.

WARRANTY

Backing our production

WARRANTY

The Nectar Collector is handmade past man beings. We strive to become it correct every fourth dimension but occasionally defects in materials and workmanship slip through our quality control system and end up in the hands of our customers. If you are not 100% satisfied with your Nectar Collector when you receive it, please contact united states and nosotros will see what we can exercise to arrive right. Our mission is the continuous improvement of our product line every bit well as the technique of vertical vaporizing. We are interested in any feedback from yous our most valued customer.

RETURNS & REPAIRS

Shit Happens

RETURNS & REPAIRS

Shit happens… Hither at Nectar Collector we take seen it all and fixed most of it. Anything short of your favorite piece in the world laying in 100 pieces on your tile floor is probably repairable. Our rates are reasonable and our turnaround fourth dimension is fast. Let the states know what is broken and we volition permit you know what nosotros tin can do.

If yous need to render your Nectar Collector for any reason please visit our Returns and Repairs portal.

Frequently Asked Questions

The number that is etched into the piece is the number of that slice. For example, if y'all take an Nectar Collector Mini numbered #1420, y'all have the 1420th Nectar Collector Mini made. The signature is where Kristian Merwin signs the piece.

Some coils thread into the atomizer counter clockwise and so that when threading the atomizer to the mouthpiece attachment, it does not unscrew itself. Exist sure to bank check the threading direction when attaching the coil.

The first pace in opening a Wholesale Account with u.s.a. is to apply through our easy online application located here. We are only offering Wholesale pricing to businesses with a brick & mortar storefront at this time.

Let the piece to sit in hot h2o for a few minutes. This loosens the residue in the joint and should allow an easier release.

Why Should You Flavour Your Tip?

  • It makes the fabric stronger & clearer.
  • It will close the pours making the tip very smooth & piece of cake to clean.
  • It makes the tip cleaner by removing any chemical residue.
  • It will insure a longer life for the tip.
  • Later on seasoning, your tip becomes a proper catalyst for vaporization. Your concentrate's will taste much better!

How To Flavor Your Tip

  1. Use tongs to hold the tip.
  2. Rut the tip for ii min.
  3. Carefully driblet the hot tip in ice water.
  4. Remove the tip, dry thoroughly, & bask!

Annotation: Your titanium tip will become reddish & blueish in colour after seasoning.

Be conscientious with solvents! We accept observe issues with Simple Green. Practice not utilise metal cleaning tools, including steel wool, near the decals.

Once your order has been completed and is ready to send, yous will receive an e-mail notification which volition include your tracking number. If you practise not come across information technology come through to your inbox, please bank check your spam folder equally information technology may be redirected there.

When proper nectar collecting technique is used: yes (encounter to a higher place). The heat of the tip is well below the wink bespeak of the silicone blistering pad material and the time that the hot tip is in contact with the material is not long enough to crusade any off-gassing of the pad. Call back information technology's dip and sip non hold and suck …

  • To avoid adventitious separation of your tip or mouthpiece from the Nectar Collector torso, cheque for a snug fit Earlier EVERY Utilise!
  • DO Non OVERHEAT THE TIP! If it's glowing red, information technology's too hot. Excessive heating of the tip tin lead to swell of the tip or joint or WORSE.
  • Fill your water cooled Nectar Collector with the tip removed. Water trapped in the tip can pb to bang-up of the tip or articulation or WORSE.
  • Make full SLOWLY with water. Filling too quickly will cause a siphon upshot which will cause the h2o to just flow through the piece.
  • Fill with h2o most half way up the inside diffuser for optimal percolation.
  • If you are having issues filling your Nectar Collector with water; to endeavour to fill up it from the tip joint rather than the mouthpiece. With some pieces it seems to work meliorate that way.
  • To clear water from the spill proof Nectar Collectors with fixed mouthpieces, remove the tip and blow down through the mouthpiece.
  • To extend the life of your Nectar Collector glass tips, first heat the tip gently by moving the flame in a brushing motion across the tip until information technology has a faint cherry-red glow.
  • It is important to hold the Nectar Collector horizontally while heating to avoid leaks from whatever rest that may be inside the tip.
  • To heat the tip quickly and conserve your butane, attempt heating the tip with the top of the blue flame where it meets the yellow flame.
  • Just considering a tip is cracked doesn't mean it'southward cleaved. Cracks are natural when glass gets heated and cooled over and over.
  • To become the most out of your stash and make information technology concluding, describe air through the mouthpiece before putting the heated tip to your nectar.

If you take an old schoolhouse 14mm footing articulation employ Joint Wax on footing joints and tips to keep them stuck together when y'all desire and easy to pull apart when you're washed. Utilize a sparse coating of joint wax to the male joint. Gently heat the articulation wax using your torch until it just starts to melt. Immediately insert into the female articulation and twist back and forth until both surfaces are evenly covered and the joints are set in place. To have apart simply twist and wiggle the joints apart.